Product Features

* By adopting superior hydraulic models and advanced manufacturing processes, the pump’s performance and service life are significantly enhanced.

* Thanks to the mechanical seal, which uses hard alloy and fluororubber as sealing materials, the pump’s operational reliability and the temperature range of the conveyed medium can be improved.

* The overall structure is compact, small in size, lightweight, low-noise, significantly energy-efficient, and easy to maintain.

* The inlet and outlet of the multistage pump are located on the same horizontal plane as the pump base, allowing it to be directly installed into piping systems.

* A standard motor is used, and users can equip the pump with a motor as needed. Users can also optionally install an intelligent protector to provide effective protection against conditions such as dry running, phase failure, and overload.

Uses and Scope of Application

The CDL/CDLF type is a non-self-priming, vertical multistage centrifugal pump (hereinafter referred to as the pump), characterized by high efficiency, low noise, resistance to mild corrosion, compact structure, attractive appearance, small size, light weight, convenient operation and maintenance, and reliable sealing performance.

I. Uses

* The product is suitable for low-viscosity, neutral, non-explosive liquids that do not contain solid particles or fibers. The liquid being conveyed must not be chemically corrosive to the pump’s materials.

* Boiler feedwater and condensate system;

* Water treatment, osmosis, and filtration systems;

* Food and beverage industry;

* High-rise building water supply and drainage;

* Irrigation for agriculture, nurseries, and golf courses;

* Fire protection system;

* Industrial cleaning systems;

* Liquid conveyance, circulation, and lifting;

* Hot water and cold water;

II. Scope of Application

* Medium temperature: -15°C to +120°C

* Flow range: 0.4–240 m³/h;

* Medium pH range: pH 5–9;

* Maximum ambient temperature: +40°C;

* Maximum altitude: 1000m;

* Minimum inlet pressure refers to the NPSH curve;

* Maximum working pressure: as shown in Table 1

※When the specific gravity and viscosity of the liquid conveyed by the pump are greater than those of water, the shaft power will increase. Therefore, it is essential to use a motor that matches the shaft power.

　　Model Meaning

　　

Structural Description

Figure 1-A CDLF 1,2,3,4

Figure 1-B CDLF 8,12,16,20

Figure 1-C CDLF 32,42,65,85

Figure 1-D CDLF8,120,150,200

　　* Thanks to the mechanical seal, which uses hard alloy and fluororubber as sealing materials, the pump’s operational reliability and the temperature range of the conveyed medium can be improved.

　　* The overall structure is compact, small in size, lightweight, low-noise, significantly energy-efficient, and easy to maintain.

　　* The inlet and outlet of the multistage pump are located on the same horizontal plane as the pump base, allowing it to be directly installed into piping systems.

　　* A standard motor is used, and users can equip the pump with a motor as needed. Users can also optionally install an intelligent protector to provide effective protection against conditions such as dry running, phase failure, and overload.

　　Uses and Scope of Application

　　The CDL/CDLF type is a non-self-priming, vertical multistage centrifugal pump (hereinafter referred to as the pump), characterized by high efficiency, low noise, resistance to mild corrosion, compact structure, attractive appearance, small size, light weight, convenient operation and maintenance, and reliable sealing performance.

　　I. Uses

　　* The product is suitable for low-viscosity, neutral, non-explosive liquids that do not contain solid particles or fibers. The liquid being conveyed must not be chemically corrosive to the pump’s materials.

　　* Boiler feedwater and condensate system;

　　* Water treatment, osmosis, and filtration systems;

　　* Food and beverage industry;

　　* High-rise building water supply and drainage;

　　* Irrigation for agriculture, nurseries, and golf courses;

　　* Fire protection system;

　　* Industrial cleaning systems;

　　* Liquid conveyance, circulation, and lifting;

　　* Hot water and cold water;

　　II. Scope of Application

　　* Medium temperature: -15°C to +120°C

　　* Flow range: 0.4–240 m³/h;

　　* Medium pH range: pH 5–9;

　　* Maximum ambient temperature: +40°C;

　　* Maximum altitude: 1000m;

　　* Minimum inlet pressure refers to the NPSH curve;

　　* Maximum working pressure: as shown in Table 1

　　※When the specific gravity and viscosity of the liquid conveyed by the pump are greater than those of water, the shaft power will increase. Therefore, it is essential to use a motor that matches the shaft power.

　　Model Meaning

　　

　　Structural Description

　　Figure 1-A CDLF 1,2,3,4

　　Figure 1-B CDLF 8,12,16,20

　　Figure 1-C CDLF 32,42,65,85

　　Figure 1-D CDLF8,120,150,200